Micro Miniatures and Instrument Bearings		Single Row radial Ball Bearings
	600 and MR - Series		R - SERIES - Inch
Double Row Ball Bearings			(with Flange) FR - SERIES - Inch
	5200 Light Series and 5300 Medium Series		1600 - SERIES - Inch
Spherical Roller Bearings			6000 - Series Metric Extra Light Series
Mast Guide Bearings			6200 - Series Metric Light Series
Tapered Roller Bearings - Inch			6200 Inch Bore
Tapered Roller Bearings - Metric			6200 Inch Bore
	Radial Internal Clearance Bearing Quality Dimensional Tolerances Dimension Control		6800 and 6900 - Series
			6800 Series Extra Thin Series
			6900 Series Thin Series
			Felt Seal Type

FIT Number	bore d mm	Outer Diameter D mm	Width W (mm) Open	Width W (mm) Shielded	Basic Load Rating (lbs.) Dynamic(C) Static(C)
681	1.000	3.000	1.000	---------	14.2	4.3
691	1.000	4.000	1.600	---------	24.5	9.0
682	2.000	5.000	1.500	2.300	29.0	11.3
MR52	2.000	5.000	2.000	2.500	28.6	9.9
692	2.000	6.000	2.300	3.000	55.3	22.8
MR62	2.000	6.000	2.500	2.500	55.0	22.0
MR72	2.000	7.000	2.500	3.000	66.0	33.0
602	2.000	7.000	2.800	3.500	66.0	29.6
682-5	2.500	6.000	1.800	2.600	35.0	14.1
692-5	2.500	7.000	2.500	3.500	66.3	29.0
MR63	3.000	6.000	2.000	2.500	35.2	13.2
683	3.000	7.000	2.000	3.000	35.0	13.6
MR83	3.000	8.000	2.500	3.000	94.6	41.8
693	3.000	8.000	3.000	4.000	64.5	24.0
MR93	3.000	9.000	2.500	4.000	96.8	41.8
603	3.000	9.000	3.000	5.000	99.0	42.0
623	3.000	10.000	4.000	4.000	11.02	48.3
633	3.000	13.000	5.000	5.000	224.3	108.0
MR74	4.000	7.000	2.000	2.500	35.2	13.2
MR84	4.000	8.000	2.000	3.000	66.0	26.4
684	4.000	9.000	2.500	4.000	81.2	37.6
MR104	4.000	10.000	3.000	4.000	99.0	41.8
694	4.000	11.000	4.000	4.000	123.7	57.6
604	4.000	12.000	4.000	4.000	167.0	77.0
624	4.000	13.000	5.000	5.000	224.5	108.6
634	4.000	16.000	5.000	5.000	300.4	140.4
MR85	5.000	8.000	2.000	2.500	46.2	22.0
MR95	5.000	9.000	2.500	3.000	72.6	30.8
MR105	5.000	10.000	3.000	4.000	72.6	30.8
MR115	5.000	11.000	3.000	4.000	121.0	55.0
685	5.000	11.000	3.000	5.000	123.6	57.7
695	5.000	13.000	4.000	4.000	187.8	90.0

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

 

Micro Miniatures and Instrument Bearings

600 and MR - SERIES

FIT Number	bore d mm	Outer Diameter D mm	Width W (mm) Open	Width W (mm) Shielded	Basic Load Rating (lbs.) Dynamic(C) Static(C)
605	5.000	14.000	5.000	5.000	229	110
625	5.000	16.000	5.000	5.000	300	140
635	5.000	19.000	6.000	6.000	400	190
MR106	6.000	10.000	2.500	3.000	84	40
MR126	6.000	12.000	3.000	4.000	121	55
686	6.000	13.000	3.500	5.000	187	90
696	6.000	15.000	5.000	5.000	231	110
606	6.000	17.000	6.000	6.000	339	163
626	6.000	19.000	6.000	6.000	400	190
MR117	7.000	11.000	2.500	3.000	77	36
687	7.000	14.000	3.500	5.000	200	99
697	7.000	17.000	5.000	5.000	275	141
607	7.000	19.000	6.000	6.000	385	180
627	7.000	22.000	7.000	7.000	580	290
MR128	8.000	12.000	2.500	3.500	93	47
MR148	8.000	14.000	3.500	4.000	140	69
688	8.000	16.000	4.000	5.000	235	120
698	8.000	19.000	6.000	6.000	285	145
608	8.000	22.000	7.000	7.000	580	290
628	8.000	24.000	8.000	8.000	690	350
689	9.000	17.000	4.000	5.000	229	128
699	9.000	20.000	6.000	6.000	310	160
609	9.000	24.000	7.000	7.000	580	280
629	9.000	26.000	8.000	8.000	790	400

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

*Flanged miniatures are available on some sizes

Single Row Radial Ball Bearing

R - SERIES - Inch

FIT Number	bore d mm	Outer Diameter D mm	Width W (mm) Open	Width W (mm) Shielded	Basic Load Rating (lbs.) Dynamic(C) Static(C)
R09	.0400	.1250	.0469	--------	11	3
R0	.0469	.1562	.0625	.0937	15	6
R1	.0550	.1875	.0781	.1094	26	10
R1-4	.0781	.2500	.0937	.1406	35	13
R133	.0937	.1875	.0625	.0937	22	8
R143	.0937	.2500	.0937	.1094	56	18
R1-5	.0937	.3125	.1094	.1406	64	24
R144	.1250	.2500	.0937	.1094	35	13
R154	.1250	.3125	.1094	.1094	76	23
R2-5	.1250	.3125	.1094	.1406	64	24
R2-6	.1250	.3750	.1094	.1406	73	29
R164	.1250	.3750	.0937	.0937	109	42
R2	.1250	.3750	.1562	.1562	73	49
R174	.1250	.4100	.1094	.1094	109	43
R184	.1250	.5000	.1094	.1094	82	33
R2A	.1250	.5000	.1719	.1719	73	29
R1204	.1250	.7500	.1250	----------	271	131
R155	.1562	.3125	.1094	.1250	42	18
R156	.1875	.3125	.1094	.1250	42	18
R166	.1875	.3750	.1250	.1250	81	33
R186	.1875	.5000	.1094	.1562	155	49
R3	.1875	.5000	.1562	.1960	147	64
R3A	.1875	.6250	.1960	.1960	147	64
R168	.2500	.3750	.1250	.1250	42	20
R188	.2500	.5000	.1875	.1875	123	55
R4	.2500	.6250	.1960	.1960	167	77
R4A	.2500	.7500	.2188	.2812	403	198
R1810	.3125	.5000	.1562	.1562	161	62
R6	.3750	.8750	.2188	.2812	575	304
R8	.5000	1.1250	.2500	.3125	880	505
R10	.6250	1.3750	.2812	.3438	1036	624
R12	.7500	1.6250	.3125	.4375	1630	1000
R14	.8750	1.8750	.3750	.5000	1740	1111
R16	1.000	2.0000	.3750	.5000	1850	1222
R18	1.1250	2.1250	.3750	.5000	2150	1407
R20	1.2500	2.2500	.3750	.5000	2420	1960
R22	1.3750	2.5000	.4375	.5625	2755	1910
R24	1.5000	2.6250	.4375	.5625	2906	2085

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Single Row Radial Ball Bearing with Flange

FR - SERIES - Inch

FIT Number	bore d Inch	Outer Diameter D Inch	Width W (Inch) Open	Width W (Inch) Shielded	Flange Width W(Inch) Open Shielded		Flange Diam. In. (D1)	Basic Load Rating (lbs.) Dynamic(C)Static(C)
FRO	.0469	.1562	.0625	.0937	.013	.031	.2030	15	6
FRI	.0550	.1875	.0781	.1094	.023	.031	.2340	26	10
FRI-4	.0781	.2500	.0937	.1406	.023	.031	.2960	35	13
FR133	.0937	.1875	.0625	.0937	.018	.031	.2340	22	8
FR143	.0937	.2500	.0937	.1094	.023	.031	.2960	56	18
FR1-5	.0937	.3125	.1094	.1406	.023	.031	.3590	64	24
FR144	.1250	.2500	.0937	.1094	.023	.031	.2960	35	13
FR2-5	.1250	.3125	.1094	.1406	.023	.031	.3590	64	24
FR2-6	.1250	.3750	.1094	.1406	.023	.031	.4220	73	29
FR2	.1250	.3750	.1562	.1562	.030	.031	.4400	73	29
FR155	.1562	.3125	.1094	.1250	.023	.036	.3590	42	18
FR156	.1875	.3125	.1094	.1250	.023	.036	.3590	42	18
FR166	.1875	.3750	.1250	.1250	.023	.31	.4220	81	33
FR3	.1875	.5000	.1562	.1960	.042	.042	.5650	147	64
FR168	.2500	.3750	.1250	.1250	.023	.036	.4220	42	20
FR188	.2500	.5000	.1250	.1875	.023	.045	.5470	123	55
FR4	.2500	.6250	.1960	.1960	.042	.042	.6900	167	77
FR6	.3750	.8750	.2188	.2812	.062	.062	.9690	575	304
FR8	.5000	1.1250	.2500	.3125	.062	.062	1.2252	880	505

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

"Our courteous and friendly sales representatives are eager to serve you "

* High Quality Products!

* Competitive Pricing!

* Fast Delivery!

Single Row Radial Ball Bearings

1600 - SERIES - Inch

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
1601	.1875	.6875	.3125	340	163
1602	.2500	.6875	.3125	340	163
1603	.3125	.8750	.3438	573	302
1604	.3750	.8750	.3438	573	302
1605	.3125	.9063	.3125	573	302
1606	.3750	.9063	.3125	573	302
1607	.4375	.9063	.3125	800	436
1614	.3750	1.1250	.3750	882	505
1615	.4375	1.1250	.3750	882	505
1616	.5000	1.1250	.3750	882	505
1620	.4375	1.3750	.4375	1323	781
1621	.5000	1.3750	.4375	1323	781
1622	.5625	1.3750	.4375	1323	781
1623	.6250	1.3750	.4375	1323	781
1628	.6250	1.6250	.5000	1627	1001
1630	.7500	1.6250	.5000	1627	1001
1633	.6250	1.7500	.5000	1627	1001
1635	.7500	1.7500	.5000	1627	1001
1638	.7500	2.0000	.5625	2426	1563
1640	.8750	2.0000	.5625	2426	1563
1641	1.0000	2.0000	.5625	2426	1563
1652	1.1250	2.5000	.6250	2880	1890
1654	1.2500	2.5000	.6250	2880	1890
1657	1.2500	2.5625	.6875	3369	2251
1658	1.3125	2.5625	.6875	3369	2251

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

(1) Width open - .2500

(2) Width open - .2813

Double Row Ball Bearings

5200 Light Series and 5300 Medium Series

Double Row Ball Bearings are a common solution to high load applications.

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
5200	.3937	1.1811	9/16	1150	750
5201	.4724	1.2598	5/8	1580	1030
5202	.5906	1.3780	5/8	1635	1110
5203	.6693	1.5748	11/16	2085	1450
5204	.7874	1.8504	13/16	3060	2325
5205	.9843	2.0472	13/16	3550	2710
5206	1.1811	2.4409	15/16	4690	3885
5207	1.3780	2.8346	1-1/16	6410	5505
5208	1.5748	3.1496	1-3/16	7330	6370
5209	1.7717	3.3465	1-3/16	7890	6860
5210	1.9685	3.5433	1-3/16	8680	7550

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

3200 Series is equivalent to 5200 Series

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
5300	.3937	.3780	3/4	1731	1224
5301	.4724	1.4567	3/4	1996	1389
5302	.5906	1.6535	3/4	2480	1710
5303	.6693	1.8504	7/8	3395	2580
5304	.7874	2.0472	7/8	3440	2615
5305	.9843	2.4409	1	4550	3765
5306	1.1811	2.8346	1-3/16	7050	5795
5307	1.3780	3.1496	1-3/8	8815	7495
5308	1.5748	3.5433	1-7/16	10800	9365
5309	1.7717	3.9370	1-9/16	12500	11000
5310	1.9685	4.3307	1-3/4	14800	13200

If you have any questions, please feel free to contact us.

 

Back to Top

 

3300 Series is equivalent to 5300 Series

Single Row Radial Ball Bearings

6000 - Series Metric Extra Light Series

FIT Number	Bore d-(mm)	Outside Diameter D-(mm)	Width B-(mm)	Radius r-(mm)	Basic Static (Co) Load - (lbs.)	Basic Dynamic (Co) Load - (lbs.)	Approx. Speed Limit - (RPM)
6000	10	26	8	0.5	440	1,040	34,000
6001	12	28	8	0.5	540	1,140	32,000
6002	15	32	9	0.5	640	1,260	28,000
6003	17	35	10	0.5	735	1,360	24,000
6004	20	42	12	1.0	1,140	2,110	20,000
6005	25	47	12	1.0	1,315	2,520	18,000
6006	30	55	13	1.5	1,860	2,990	15,000
6007	35	62	14	1.5	2,320	3,580	13,000
6008	40	68	15	1.5	2,590	3,780	12,000
6009	45	75	16	1.5	3,400	4,770	11,000
6010	50	80	16	1.5	3,740	4,860	10,000
6011	55	90	18	2.0	4,780	6,320	9,000
6012	60	95	18	2.0	5,220	6,660	8,000
6013	65	100	18	2.0	5,660	6,910	7,500
6014	70	110	20	2.0	6,950	8,480	7,000
6015	75	115	20	2.0	7,540	8,930	6,700
6016	80	125	22	2.0	8,950	10,700	6,300
6017	85	130	22	2.0	9,690	11,100	6,000
6018	90	140	24	2.5	11,170	13,200	5,600
6019	95	145	24	2.5	12,120	13,600	5,300
6020	100	150	24	2.5	12,200	13,600	5,000
6021	105	160	26	3.0	14,800	16,400	4,800
6022	110	170	28	3.0	16,400	18,400	4,500

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

* Cold Roll Forming Technique *ABEC 1-9

* Meets AFBMA and ISO Standards * Competitive Pricing

*EMQ Bearings * Immediate Delivery

Single Row Radial Ball Bearings

6200 - Series Metric Light Series

FIT Number	Bore d-(mm)	Outside Diameter D-(mm)	Width B-(mm)	Radius r-(mm)	Basic Static (Co) Load - (lbs.)	Basic Dynamic (Co) Load - (lbs.)	Approx. Speed Limit - (RPM)
6200	10	30	9	1.0	540	1,140	30,000
6201	12	32	10	1.0	690	1,550	28,000
6202	15	35	11	1.0	850	1,760	24,000
6203	17	40	12	1.0	1,080	2,150	20,000
6204	20	47	14	1.5	1,500	2,860	18,000
6205	25	52	15	1.5	1,770	3,150	15,000
6206	30	62	16	1.5	2,540	4,390	13,000
6207	35	72	17	2.0	3,470	5,740	11,000
6208	40	80	18	2.0	4,000	6,910	10,000
6209	45	85	19	2.0	4,570	7,470	9,000
6210	50	90	20	2.0	5,240	7,900	8,500
6211	55	100	21	2.5	6,600	9,810	7,500
6212	60	110	22	2.5	8,140	10,7000	7,000
6213	65	120	23	2.5	9,020	12,600	6,300
6214	70	125	24	2.5	9,920	13,900	6,000
6215	75	130	25	2.5	10,860	14.900	5,600
6216	80	140	26	3.0	11,900	15,800	5,300
6217	85	150	28	3.0	13,900	18,700	5,000
6218	90	160	30	3.5	16,100	21,500	4,500
6219	95	170	32	3.5	18,400	24,300	4,300
6220	100	180	34	3.5	20,900	27,900	4,000
6221	105	190	36	3.5	23,600	29,900	3,800
6222	110	200	38	3.5	26,300	32,900	3,600
6224	120	215	40	3.5	29,500	32,900	3,400

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

* Cold Roll Forming Technique *ABEC 1-9

* Meets AFBMA and ISO Standards * Competitive Pricing

*EMQ Bearings * Immediate Delivery

Single Row Radial Ball Bearings

6200 Inch Bore

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
6201-8(1/2")	.5000	1.2598	.3937	1050	595
6201-13(mm)	.5118	1.2598	.3937	1050	595
6202-8(1/2")	.5000	1.3738	.4331	1340	775
6202-10(5/8")	.6250	1.3780	.4331	1340	775
6202-16(mm)	.6299	1.3780	.1340	775	.090
6203-8(1/2")	.5000	1.5748	.4724	1660	985
6203-10(5/8")	.6250	1.5748	.4724	1660	985
6203-12(3/4")	.7500	1.5748	.4724	1660	985
6203-16(mm)	.6299	1.5748	.4724	1660	985
6204-12(3/4")	.7500	1.8504	.5512	2200	1390
6204-14(14/16")	.8750	1.8504	.5512	2200	1390
6205-16(1")	1.000	2.0472	.5906	2400	1560

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Special Sizes (mm)

FIT Number	Bore d	Outside Diameter D	Width B	Basic Static (Cor) Load - (lbs.)	Basic Dynamic (Co) Load - (lbs.)
203KRR2	0.6399	1.5748	0.72	-	-
Z9504B	0.7505	1.7803	0.6098	-	-
99502H	0.62499	1.3749	0.433	446	756
499502H	0.62499	1.3749	0.433	446	756

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please call for sizes not listed, we can cross reference many bearings in stock!

Single Row Radial Ball Bearings

6300 - Series Metric Medium Series

FIT Number	Bore d- (mm)	Outside Diameter D-(mm)	Width B- (mm)	Radius r- (mm)	Basic Static (Co) Load - (lbs.)	Basic Dynamic (Co) Load - (lbs.)	Approx. Speed Limit - (RPM)
6300	10	35	11	1.0	780	1,810	26,000
6301	12	37	12	1.5	950	2,190	24,000
6302	15	42	13	1.5	1,250	2,570	20,000
6303	17	47	14	1.5	1,500	3,040	19,000
6304	20	52	15	2.0	1,760	3,580	16,000
6305	25	62	17	2.0	2,540	5,060	14,000
6306	30	72	19	2.0	3,380	6,320	11,000
6307	35	80	21	2.5	4,400	7,470	10,000
6308	40	90	23	2.5	5,400	9,230	9,000
6309	45	100	25	2.5	6,600	11,900	8,000
6310	50	110	27	3.0	8,600	13,900	7,500
6311	55	120	29	3.0	10,120	16,100	6,700
6312	60	130	31	3.5	11,700	18,400	6,000
6313	65	140	33	3.5	13,500	20,800	5,600
6314	70	150	35	3.5	15,300	23,400	5,300
6315	75	160	37	3.5	17,350	25,200	5,000
6316	80	170	39	3.5	19,500	27,900	4,500
6317	85	180	41	4.0	21,700	29,900	4,300
6318	90	190	43	4.0	24,000	32,200	4,000
6319	95	200	45	4.0	24,500	34,400	3,800
6320	100	215	47	4.0	31,700	39,200	3,600

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

* Cold Roll Forming Technique *ABEC 1-9

* Meets AFBMA and ISO Standards * Competitive Pricing

*EMQ Bearings * Immediate Delivery

Single Row Radial Ball Bearings

6800 and 6900 - SERIES

6800 Series Extra Thin Series

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
6800	.3937	.7480	.1969	.242	141
6801	.4724	.8268	.1969	251	159
6802	.5906	.9449	.1969	273	214
6803	.6693	1.0236	.1969	296	236
6804	.7874	1.2598	.2756	458	314
6805	.9843	1.4567	.2756	511	381
6806	1.1811	1.6535	.2756	516	404
6807	1.3780	1.8504	.2756	529	449
6808	1.5748	1.0472	.2756	550	493
6809	1.7717	2.2835	.2756	1043	853
6810	1.9685	2.5591	.2756	1077	954

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

6900 Series Thin Series

FIT Number	bore d Inch	Outer Diameter D Inch	Width W Inch	Basic Load Rating (lbs.) Dynamic(C) Static(C)
6900	.3937	.8661	.2362	465	258
6901	.4724	.9449	.2362	500	291
6902	.5906	1.1024	.2756	705	415
6903	.6693	1.1811	.2756	805	510
6904	.7874	1.457	.3543	1100	725
6905	.9843	1.6535	.3543	1220	870
6906	1.1811	1.8504	.3543	1250	945
6907	1.3780	2.1654	.3937	1930	1430
6908	1.5748	2.4409	.4724	2100	1680
6809	1.7717	2.6772	.4724	2610	2120
6910	1.9685	2.8346	.4724	2700	2290

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Serving you better is our goal! Please call for any sizes not listed.

Single Row Radial Ball Bearings

Felt Seal Type

These Bearings are equipped with single felt or double felt seals or a combination of a single felt seal with a metallic shield. They are also available with the standard width bearing rings or as the "WC" (Wide Cup or outer ring) variation.

FIT Number	bore d Inch	Outer Diameter D Inch	OD Width W - Inch	ID Width W- Inch	Overall Width W	Basic Load Rating (lbs.) Dynamic(C) Static(C)
87503	.6693	1.5748	.4724	.5380	.5625	1160	985
88503	.6693	1.5748	.4724	.6536	.6536	1600	985
87504	.7874	1.8504	.5512	.6000	.6250	2220	1410
88504	.7874	1.8504	.5512	.6988	.6988	2220	1410
87505	.9843	2.0472	.5906	.6000	.6250	2430	1610
88505	.9843	2.0472	.5906	.6594	.6594	2430	1610
87506	1.1811	2.4409	.6299	.7480	.7874	3350	2320
88506	1.1811	2.4409	.6299	.9449	.9449	3350	2320
87507	1.3780	2.8346	.6693	.7874	.8268	4450	3150
88507	1.3780	2.8346	.6693	.9843	.9843	4450	3150
87508	1.5748	3.1496	.8268	.9449	.9449	5050	3650
88508	1.5748	3.1496	.8268	1.0630	1.0630	5050	3650
87509	1.7717	3.3465	.8268	.9449	.9449	5650	4150
88509	1.7717	3.3465	.8268	1.0630	1.0630	5650	4150
87510	1.9685	3.5433	.8661	1.0236	1.0236	6050	4650
88510	1.9685	3.5433	.8661	1.1181	1.1811	6050	4650
88128	1.5346	3.1496	.8268	1.0831	1.0831	5645	4025
88128R	1.5346	3.1496	.8268	1.0831	1.0831	5645	4025

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

We're dedicated to customer service & satisfaction!

Tapered Roller Bearings - Inch

Cone					Cup
FIT Cone Number	Dimension (mm)			Weight(kg)	FIT Cup Number	Dimension (mm)				Weight(kg)
	d	B	r1			D	C	r2	T
368	50.800	22.225	1.5	0.352	362	90.000	15.875	2.0	20.000	0.174
368A	50.000	22.225	3.5	0.348	362A	88.900	16.513	1.3	20.638	0.165
385	50.000	21.946	2.3	0.523	382	98.425	20.274	0.8	21.000	0.226
387A	57.150	21.946	3.5	0.420	382S	96.838	15.875	0.8	21.000	0.178
387AS	57.150	21.946	5.0	0.415	382S	96.838	20.274	2.3	25.400	0.249
390	57.150	21.996	2.3	0.685	394A	110.000	22.000	0.8	22.000	0.263
462	57.150	29.317	2.3	0.711	453X	104.775	24.605	3.3	30.162	0.369
535	44.450	36.957	3.5	1.14	532X	107.950	28.575	3.3	36.512	0.586
					532A	111.125	30.162	3.3	38.100	0.758
575	76.200	36.098	3.5	1.64	572	139.992	28.575	3.3	36.512	0.802
580	82.550	36.098	3.5	1.42
1755	22.225	19.837	1.3	0.152	1729	56.896	15.875	0.8	19.386	0.102
1988	28.575	19.355	3.5	0.139	1922	57.150	15.875	1.5	19.846	0.078
2580	31.750	25.357	0.8	0.282	2520	66.421	20.638	3.3	25.400	0.128
2776	38.100	25.654	4.3	0.304	2720	76.200	19.050	3.3	23.812	0.184
2780	36.487	25.654	1.5	0.330	2729	76.200	19.050	0.8	23.812	0.190
2785	33.338	25.654	3.5	0.360	2733	75.260	19.050	3.3	23.812	0.168
2788	38.100	25.654	3.5	0.306
2790	33.338	25.654	1.5	0.365
2794	36.687	25.654	3.5	0.328
2796	34.925	25.654	3.5	0.342
3379	34.925	30.391	3.5	0.503	3320	80.167	23.812	3.3	29.370	0.217
3790	38.100	29.771	3.5	0.423	3420	79.375	23.812	3.3	29.370	0.371
3780	50.800	30.302	3.5	0.565	3720	93.264	23.812	3.3	30.162	0.291

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Tapered Roller Bearings - Inch

Cone					Cup
FIT Cone Number	Dimension (mm)			Weight(kg)	FIT Cup Number	Dimension (mm)				Weight(kg)
	d	B	r1			D	C	r2	T
3872	34.925	30.162	3.5	0.598	3820	85.725	23.812	3.3	30.162	0.282
3872A	34.925	30.162	0.8	0.604	3821	85.725	23.812	1.3	30.162	0.286
3878	36.512	30.162	0.8	0.562
3878A	36.512	30.162	3.5	0.577
3982	63.500	30.048	3.5	0.773	3920	112.712	23.812	3.3	30.162	0.447
3984	66.675	30.048	3.5	0.693	3925	112.712	23.812	0.8	30.162	0.452
3994	66.675	30.048	5.5	0.689	3925	112.712	23.812	0.8	30.162	0.452
A6075	19.050	11.153	1.0	0.0346	A6157	39.992	9.525	1.3	12.014	0.0314
07097	25.000	14.260	1.5	0.085	07196	50.005	9.525	1.0	13.945	0.0350
07100s	25.400	14.260	1.5	0.0840	07204	51.994	12.700	1.3	15.011	0.0610
07093	23.813	14.260	1.6	0.090	07204	51.994	12.700	1.3	15.011	0.0610
LM11749	17.462	14.605	1.3	0.055	LM11710	39.878	10.668	1.3	13.843	0.0280
LM11949	19.050	16.637	1.3	0.0800	LM11910	45.237	12.065	1.3	15.494	0.0440
M12648	22.225	18.288	1.3	0.111	M12610	50.005	13.970	1.3	17.526	0.0590
M12649	21.430	18.288	1.3	0.115	M12610	50.005	13.970	1.3	17.526	0.0590
LM12748	21.430	16.637	1.3	0.0800	LM12710	45.237	12.065	1.3	15.494	0.0380
LM12749	21.986	16.637	1.3	0.078	LM12711	45.974	12.065	1.3	15.949	0.0430
14124	31.750	19.583	0.8	0.221
14125A	31.750	19.583	3.5	0.215	14274	69.102	15.875	3.3	19.845	0.132
14137A	34.925	19.580	1.5	0.191	14276	69.012	15.875	1.3	19.845	0.134
14138A	34.925	19.583	3.5	0.188	14277	69.012	18.415	2.3	22.385	0.160
15100	25.400	20.638	3.5	0.195
15101	25.400	20.638	0.8	0.201	15243	61.912	14.288	2.0	19.050	0.0787
15103S	26.162	19.939	0.8	0.198	15244	61.999	15.875	1.3	20.638	0.0910
15123	31.750	19.050	SPEC	0.152	15245	61.999	14.288	1.3	19.050	0.0811
15125	31.750	20.638	3.5	0.152	15250	63.500	15.875	1.3	20.638	0.109
21075	19.050	21.839	1.5	0.157	21212	53.975	15.875	2.3	22.225	0.101
24780	41.275	23.020	3.5	0.275	24720	76.200	17.462	0.8	22.225	0.199

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Tapered Roller Bearings - Inch

Cone					Cup
FIT Cone Number	Dimension(mm)			Weight(kg)	FIT Cup Number	Dimension(mm)				Weight(kg)
	d	B	r1			D	C	r2	T
25577	42.875	25.400	3.5	0.380	25521	83.058	19.050	3.3	23.812	0.196
25580	44.450	25.400	3.5	0.359	25522	83.058	19.114	2.0	23.876	0.200
25582	44.450	25.400	5.0	0.355	25523	82.931	22.225	2.3	26.988	0.246
25590	44.618	25.400	3.5	0.338
25877	34.925	24.608	1.5	0.303	25820	73.025	19.050	2.3	23.812	0.162
25878	34.925	24.608	3.5	0.299	25821	73.025	19.050	0.8	23.812	0.165
25880	36.487	24.608	1.5	0.286
27690	83.345	29.000	3.5	0.727	27620	125.412	19.845	1.5	25.400	0.348
28580	50.800	25.400	3.5	0.450	28521	92.075	19.845	0.8	24.608	0.247
28584	52.388	25.400	3.5	0.422
28678	50.800	24.608	3.5	0.589	28622B	97.630	19.446	0.8	24.608	0.276
28680	55.562	24.608	3.5	0.513
28985	60.325	25.400	3.5	0.524	28920	101.600	19.845	3.3	25.400	0.266
29580	60.000	25.400	3.5	0.722	29520	107.950	19.050	3.3	25.400	0.281
29590	66.675	25.400	3.5	0.590	29521	110.000	19.050	1.3	25.400	0.333
29586	63.500	25.400	1.5	0.661	29522	107.950	19.050	0.8	25.400	0.284
LM29748	38.100	18.288	SPEC	0.158	LM29710	65.088	13.910	1.3	18.034	0.0780
LM29749	38.100	18.288	2.3	0.16
33281	71.438	30.162	3.5	0.808	33462	117.457	23.812	3.3	30.162	0.434
L44643	25.400	14.732	1.3	0.0900	L44610	50.292	10.668	1.3	14.224	0.0390
L44649	26.988	14.732	3.5	0.0850
L45449	29.000	14.732	3.5	0.0774	L45410	50.292	10.668	1.3	14.224	0.0356
LM48548	34.925	18.288	SPEC	0.172	LM48510	65.088	13.970	1.3	18.034	0.0864
LM67047	31.750	16.764	2.3	0.120
LM67048	31.750	16.764	SPEC	0.117	LM67010	59.131	11.811	1.3	15.875	0.0620
LM67049	31.750	16.764	1.5	0.121	LM67011	59.131	13.716	1.3	17.780
LM67049A	31.750	16.764	0.8	0.122
L68149	35.000	16.764	SPEC	0.118	L68110	59.131	11.938	1.3	15.875	0.0522
					L68111	60.000	11.938	1.3	15.875	0.0125
JL69349	38.000	17.000	SPEC	0.125	JL69310	63.000	13.500	1.3	17.000	0.0710

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Tapered Roller Bearings - Inch

Cone					Cup
FIT Cone Number	Dimension (mm)			Weight(kg)	FIT Cup Number	Dimension (mm)				Weight(kg)
	d	B	r1			D	C	r2	T
M86649	30.162	21.433	1.5	0.210	M86610	64.292	16.670	1.5	24.433	0.127
M88047	33.338	22.225	5.5	0.226	M88010	68.263	17.462	1.5	22.225	0.146
M88048	33.338	22.225	0.8	0.236	M88011	68.262	17.462	2.3	22.225	0.144
HM88542	31.750	27.783	1.3	0.379	HM88510	73.025	23.020	3.3	29.370	0.242
HM88649	34.925	25.400	2.3	0.296	HM88610	72.233	19.842	2.3	25.400	0.183
HM88649A	34.925	25.400	3.5	0.294	HM88610	72.233	19.842	2.3	25.400	0.183
HM88446	34.925	28.575	3.5	0.400	HM89410	76.200	23.020	3.3	29.370	0.257
HM89448	36.512	28.575	0.8	0.384	HM89410	76.200	23.020	3.3	29.370	0.257
LM102949	45.242	19.812	3.5	0.202	LM102910	73.431	15.748	0.8	19.558	0.101
					LM102911	73.431	17.620	0.8	21.430	0.118
JLM104947A	50.800	22.225	0.5	0.305
JLM104948	50.800	21.501	3.0	0.293	JLM104910	82.000	17.000	0.5	21.976	0.129
LM104949	50.800	22.225	3.5	0.289	LM104911	82.550	16.510	1.3	21.590	0.131
LM104949E	50.800	25.883	3.5	0.307
HM212047	63.500	38.354	7.0	1.25	HM212010	122.238	29.718	1.5	38.100	0.600
HM212049	66.675	38.354	3.5	1.26	HM212011	122.238	29.718	3.5	38.100	0.590
HM218248	90.00	40.000	7.0	1.73	HM218210	147.000	32.500	3.5	40.000	0.790
LM501349	41.275	19.812	3.5	0.228	LM501314	73.431	16.604	0.8	40.019	0.125
HM518445	88.900	39.688	6.4	2.11	HM518410	152.400	30.162	3.3	39.688	0.765
LM603049	45.242	19.842	3.5	0.237	LM603011	77.788	15.088	0.8	19.842	0.121
					LM603012	77.788	16.667	0.8	21.430	0.140
HM801346	38.100	28.575	0.8	0.513	HM801310	82.550	23.020	3.3	29.370	0.293
HM801346X	38.100	28.575	2.3	0.510
M802048	41.275	25.654	3.5	0.394	M802011	82.550	20.193	3.3	26.543	0.221
HM803146	41.275	29.370	3.5	0.572	HM803110	88.900	23.020	3.3	30.162	0.314
HM803149	44.450	29.370	3.5	0.522

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Tapered Roller Bearings - Metric

Tapered roller bearings are used to carry combined axial and radial loads in which the radial load is predominant. These bearings are of separable design, i.e. the rollers retained by the cage constituting an assembly with the inner ring can be separated from the outer ring. The outer rings are made interchangeable. The axial clearance can be slightly adjusted during mounting and operation. Single row tapered roller bearings restrict the relative axial displacement of the shaft or housing in one direction. Any misalignment between shaft and housing should be avoided during mounting. Since an induced axial load will appear by applying a radial load when two tapered roller bearings are used on a spindle, they should be mounted "face-to-face" or "back-to-back" to cancel induced axial loads. 

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
22206CA/W33	30	62	20	1.0			48900	52000	7500	9500	0.28
22206CAK/W33					5.5	3
22207CA/W33	35	72	23	1.1			67300	73500	6300	8000	0.43
22207CAK/W33					5.5	3
22208CA/W33	40	80	23	1.1			73600	81500	6000	7500	0.52
22208CAK/W33					5.5	3
22209CA/W33	45	85	23	1.1			77100	88000	5300	6700	0.56
22209CAK/W33					5.5	3
22210CA/W33	50	90	23	1.1			84500	100000	5000	6300	0.6
22210CAK/W33					5.5	3
22211CA/W33	55	100	25	1.5			99500	118000	4500	5600	0.82
22211CAK/W33					5.5	3
22212CA/W33	60	110	28	1.5			122000	146000	4000	5000	1.10
22212CAK/W33					5.5	3
22213CA/W33	65	120	31	1.5			148000	183000	3800	4800	1.45
22213CAK/W33					5.5	3
22214CA/W33	70	125	31	1.5			148000	186000	3600	4500	1.55
22214CAK/W33					5.5	3
22215CA/W33	75	130	31	1.5			158000	208000	3400	4300	1.65
22215CAK/W33					5.5	3
22216CA/W33	80	140	33	2			176000	228000	3200	4000	2.05
22216CAK/W33					5.5	3
22217CA/W33	85	150	36	2			210000	270000	3000	3800	2.55
22217CAK/W33					5.5	3

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
22218CA/W33	90	160	40	2			253000	340000	2600	3400	3.40
22218CAK/W33					5.5	3
22219CA/W33	95	170	43	2.1			282000	375000	2400	3200	4.0
22219CAK/W33					8.3	4.5
22220CA/W33	100	180	46	2.1			311000	415000	2200	3000	4.85
22220CAK/W33					8.3	4.5
22222CA/W33	110	200	53	2.1			408000	560000	2000	2800	7.00
22222CAK/W33					8.3	4.5
22224CA/W33	120	215	58	2.1			466000	670000	1900	2600	8.70
22224CAK/W33					11.1	6
22226CA/W33	130	230	64	2.1			546000	800000	1800	2400	11.0
22226CAK/W33					11.1	6
22228CA/W33	140	250	68	3			610000	900000	1700	2200	14.0
22228CAK/W33					11.1	6
22230CA/W33	150	270	73	3			736000	1080000	1600	2000	18.0
22230CAK/W33					13.9	7.5
22232CA/W33	160	290	80	3			863000	1290000	1500	1900	22.5
22232CAK/W33					13.9	7.5
22234CA/W33	170	310	86	4			978000	1460000	1300	1700	28.5
22234CAK/W33					16.7	9
22236CA/W33	180	320	86	4			1010000	1560000	1300	1700	29.5
22236CAK/W33					16.7	9
22238CA/W33	190	340	92	4			1110000	1700000	1200	1600	36.5
22238CAK/W33					16.7	9
22240CA/W33	200	360	98	4			1270000	1930000	1100	1500	43.50
22240CAK/W33					16.7	9

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
22244CA/W33	220	400	108	4			1520000	2360000	950	1300	60.5
22244CAK/W33					16.7	9
22248CA/W33	240	440	120	4			1910000	3000000	900	1200	83.0
22248CAK/W33					22.3	12
22252CA/W33	260	480	130	5			2300000	3550000	850	1100	110.0
22252CAK/W33					22.3	12
22256CA/W33	280	500	130	5			2350000	3750000	800	1000	115.0
22256CAK/W33					22.3	12
22260CA/W33	300	540	140	5			2760000	4250000	750	950	145.0
22260CAK/W33					22.3	12
22264CA/W33	320	580	150	5			3160000	4900000	670	850	175.0
22264CAK/W33					22.3	12
22308CA/W33	40	90	33	1.5			115000	122000	4500	5600	1.0
22308CAK/W33					5.5	3
22309CA/W33	45	100	36	1.5			138000	160000	3800	4800	1.35
22309CAK/W33					5.5	3
22310CA/W33	50	110	40	2			176000	200000	3400	4300	1.85
22310CAK/W33					5.5	3
22311CA/W33	55	120	43	2			199000	232000	3200	4000	2.35
22311CAK/W33					5.5	3
22312CA/W33	60	130	46	2.1			235000	280000	3000	3800	2.95
22312CAK/W33					5.5	3
22313CA/W33	65	140	48	2.1			253000	300000	2600	3400	3.55
22313CAK/W33					8.3	4.5
22314CA/W33	70	150	51	2.1			311000	380000	2400	3200	4.3
22314CAK/W33					8.3	4.5

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
22315CA/W33	75	160	55	2.1			3345000	430000	2200	3000	5.25
22315CAK/W33					8.3	4.5
22316CA/W33	80	170	58	2.1			374000	455000	2000	2800	6.2
22316CAK/W33					8.3	4.5
22317CA/W33	85	180	60	3			420000	520000	1900	2600	7.25
22317CAK/W33					8.3	4.5
22318CA/W33	90	190	64	3			477000	610000	1800	2400	8.6
22318CAK/W33					11.1.	6
22319CA/W33	95	200	67	3			518000	670000	1800	2400	10.2
22319CAK/W33					11.1	6
22320CA/W33	100	215	73	3			610000	800000	1700	2200	13.0
22320CAK/W33					11.1	6
22322CA/W33	110	240	80	3			725000	965000	1600	2000	18
22322CAK/W33					13.9	7.5
22324CA/W33	120	260	86	3			845000	1120000	1400	1800	22.0
22324CAK/W33					13.9	7.5
22326CA/W33	130	280	93	4			978000	1320000	1300	1700	28.5
22326CAK/W33					16.7	9
22328CA/W33	140	300	102	4			1130000	1560000	1100	1500	34.5
22328CAK/W33					16.7	9
22330CA/W33	150	320	108	4			1270000	1760000	1000	1400	41.5
22330CAK/W33					16.7	9
22332CA/W33	160	340	114	4			1380000	1960000	950	1300	50.0
22332CAK/W33					16.7	9
22334CA/W33	170	360	120	4			1540000	2160000	950	1300	58.5
22334CAK/W33					16.7	9

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
22336CA/W33	180	380	126	4			1730000	2450000	900	1200	69.0
22336CAK/W33					22.3	12
22338CA/W33	190	400	132	5			1870000	2650000	850	1100	80.0
22338CAK/W33					22.3	12
22340CA/W33	200	420	138	5			2020000	2900000	850	1100	92.5
22340CAK/W33					22.3	12
22344CA/W33	220	460	145	5			2350000	3450000	750	950	120
22344CAK/W33					22.3	12
22348CA/W33	240	500	155	5			2670000	4000000	670	850	155
22348CAK/W33					22.3	12
22352CA/W33	280	580	175	6			34500000	5200000	600	750	235.0
22352CAK/W33					22.3	12
22360CA	300	620	185								265.0
22372CA	360	750	224								466.1
22380CA	400	820	243				6560000	10400000	360	450	650
23022CA/W33	110	170	45	2			267000	440000	2200	3000	3.75
23022CAK/W33					5.5	3
23024CA/W33	120	180	46	2			305000	510000	2000	2800	4.2
22024CAK/W33					5.5	3
23026CA/W33	130	200	52	2			374000	440000	1900	2600	6.1
23026CAK/W33					8.3	4.6
23028CA/W33	140	210	53	2			397000	680000	1800	2400	6.55
23028CAK/W33					8.3	4.6
23030CA	150	225	56	2.1			437000	750000	1700	2200	7.95
23030CAK/W33					8.3	4.6
23032CA/W33	160	240	60	2.1			506000	880000	1700	2200	9.7
23032CAK/W33					11.1	6

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

 

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
23034CA/W33	170	260	67	2.1			621000	1060000	1600	2000	13.0
23034CA/W33					11.1	6
23036CA/W33	180	280	74	2.1			725000	1250000	1400	1800	17.0
23036CAK/W33					13.9	7.5
23038CA/W33	190	290	75	2.1			753000	1340000	1300	1700	18.0
23036CAK/W33					13.9	7.5
23040CA/W33	200	310	82	2.1			880000	1530000	1200	1600	23.0
23040CAK/W33					13.9	7.5
23044CA/W33	220	340	90	3			1050000	1860000	1100	1500	30.5
23044CAK/W33					13.9	7.5
23048CA/W33	240	360	92	3			1130000	2080000	1000	1400	33.5
23048CAK/W33					13.9	7.5
23052CA/W33	260	400	104	4			140000	2550000	900	1200	48.5
2302CAK/W33					16.7	9
23056CA/W33	280	420	106	4			1520000	2850000	850	1100	52.5
23056CAK/W33					16.7	9
23060CA/33	300	460	118	4			1850000	3450000	800	1000	71.5
23060CAK/W					16.7	9
23064CA/W33	320	480	121	4			1960000	3800000	800	1000	78.0
23064CAK/W33					16.7	9
23068CA	340	520	133	5			2350000	4550000	700	900	105
23072CA	350	540	134	5			2390000	4800000	670	850	110
23076CA	380	560	135	5			2480000	5000000	630	800	115
23080CA	400	600	148	5			2880000	5700000	600	750	150
23084CA	420	620	150	5			2990000	6000000	450	560	155
23088CA	440	650	157	6			3220000	6550000	430	530	180
23092CA	460	680	163	6			3450000	6950000	400	500	205
23096CAK	480	700	165	6			3340000	6800000	380	480	215

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
230/500CA	500	720	167	6			3680000	7800000	380	480	225
230/530CA	530	780	185	6			4370000	9300000	340	430	310
230/560CA	560	820	195	6			4890000	10200000	320	400	355
230/600CA	600	870	200	6			5230000	11400000	300	380	405
230/630CA	630	920	212	7.5			5750000	12500000	260	340	485
230/750CA	750	1090	250	7.5			8450000	18600000	200	280	795
230/850CA	850	1220	272	7.5			9370000	21600000	180	240	1050
23120CA/W33	100	165	52	2			322000	290000	2000	2800	4.4
23120CAK/W33					5.5	3
23121CA/W33	105	175	56	2			330000	500000	1900	2700	5.48
23121CAK/W33					5.5	3
23122CA/W33	110	180	56	2			374000	585000	1900	2600	5.57
23122CAK/W33					8.3	4.5
23124CA/W33	120	200	62	2			449000	695000	1800	2400	7.8
23124CAK/W33					8.3	4.5
23126CA/W33	130	210	64	2			489000	780000	1700	2200	8.55
23126CAK/W33					8.3	4.5
23128CA/W33	140	225	68	2.1			546000	90000	1600	2000	10.5
23128CAK/W33					8.3	4.5
23130CA/W33	150	250	80	2.1			725000	120000	1400	1800	16.0
23130CAK/W33					11.1	6
2312CA/W33	160	270	86	2.1			845000	137000	1300	1700	20.5
23132CAK/W33					13.9	7.5
23134CA/W33	170	280	88	2.1			897000	1500000	1200	1600	21.6
23134CAK/W33					13.9	7.5
23136CA/W33	180	300	96	3			1050000	1760000	1100	1500	27.5
23236CAK/W33					13.9	7.5

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
23138CA/W33	190	320	104	3			1200000	2080000	000	1400	34.5
23138CAK/W33					13.9	7.5
23140CA/W33	200	340	112	3			1380000	2360000	950	1300	42.5
23140CAK/W33					16.7	9
23144CA/W33	220	370	120	4			1580000	2750000	900	1200	53.0
23144CAK/W33					16.7	9
23148CA/W33	240	400	128	4			1790000	3200000	850	1100	65.5
23148CAK/W33					16.7	9
23252CA/W33	260	440	144	4			2220000	3900000	800	1000	90.5
23152CAK/W33					16.7	9
231156CA/W33	280	460	146	5			2300000	4250000	750	950	97.3
23156CAK/W33					16.7	9
23160CA/W33	300	500	160	5			2820000	5100000	670	850	125.0
23160CAK/W33					16.7	9
23164CA/W33	320	540	176	5			3280000	6000000	630	800	165.0
23164CAK/W33					22.3	12
23168CA	340	580	190	5			3680000	6800000	600	750	210
23172CA	360	600	192	5			3740000	6950000	560	700	220
23176CA	380	620	194	5			3740000	7100000	400	500	230
23180CA	400	650	200	6			4080000	7650000	380	480	265
23184CA	420	700	224	6			4890000	9300000	360	450	350
23188CA	440	720	226	6			5180000	10000000	340	430	360
23192CA	460	760	24	7.5			5640000	10800000	320	400	440
23196CA	480	790	248	7.5			6100000	12000000	300	380	485
231/500CA	500	830	264	7.5			6730000	12900000	280	360	580.0
23218CA/W33	90	160	52.4	2			311000	440000	1900	2600	4.6
23218CAK/W33					5.5	3

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
23220CA/W33	100	180	60.3	2.1			414000	60000	1700	2200	6.7
23220CAK/W33					8.3	4.5
23222CA/W33	110	200	69.8	2.1			518000	765000	1600	2000	9.7
23222CAK/W33					8.3	4.5
23224CA/W33	120	215	76	2.1			610000	930000	1500	1900	12.1
23224CAK/W33					8.3	4.5
23226CA/W33	130	230	80	3			690000	1060000	1300	1700	14.0
23226CAK/W33					8.3	4.5
23228CA/W33	140	250	88	3			799000	125000	1200	1600	18.5
23228CAK/W33					11.1	6
23230CA/W33	150	270	96	3			937000	1460000	1100	1500	24.0
23230CAK/W33					11.1	6
23232CA/W33	160	290	104	3			1070000	1660000	1000	1400	30.0
23232CAK/W33					13.9	7.5
23234CA/W33	170	310	110	4			1220000	1930000	950	1300	36.5
23234CAK/W33					13.9	7.5
23236CA/W33	180	320	112	4			1290000	2120000	900	1200	39
23236CAK/W33					13.9	7.5
23238CA/W33	190	340	120	4			1460000	2400000	850	1100	47.6
23238CAK/W33					16.7	9
23240CA/W33	200	360	128	4			1610000	2700000	850	1100	57.2
23240CAK/W33					16.7	9
23244CA/W33	220	400	144	4			2070000	3450000	750	950	79.5
23244CAK/W33					16.7	9
23248CA/W33	240	440	160	4			2530000	4300000	670	850	110.0
23248CAK/W33					22.3	12

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
23252CA/W33	260	480	174	5			2820000	4750000	630	800	140
23252CA/W33					22.3	12
23256CA/W33	280	500	176	5			2820000	4900000	600	750	150
23256CAK/W33					22.3	12
23260CA/W33	300	540	192	5			3340000	5850000	530	670	190
23260CAK/W33					22.3	12
23264CA/W33	320	580	208	5			3850000	6700000	500	630	240.0
23264CAK/W33					22.3	12
23268CA	340	620	224	6			4660000	8300000	430	530	295.0
23272CA	360	650	232	6			4660000	8300000	400	500	335.0
23276CA	380	680	240	6			5060000	9150000	380	480	375.0
23280CA	400	720	256	6			5750000	10400000	340	430	450.0
23284CA	420	760	272	7.5			6330000	11600000	320	400	535.0
23288CA	440	790	296	7.5			6730000	12500000	320	400	590.0
23292CA	460	830	310	7.5			7360000	13700000	300	380	695.0
23296CAK	480	870	310	7.5			8170000	15000000	260	340	800
23296CAK	480	870	310	7.5			8170000	15000000	260	340	800
232/500CA	500	920	336	7.5			9780000	18300000	240	320	985.0
232/530CA	530	980	335	9.5			11100000	20400000	220	300	1200.0
232/560CA	560	1030	365	9.5			11500000	22000000	200	280	1350.0
232/600CA	600	1090	388	9.5			13100000	25500000	190	260	1600.0
24018CA	90	140	50	2			340000	600000	1750	2200	2.76
24018CAK30/W33					5.5	3
24020CA/W33	100	150	50	2			350000	630000	1700	2100	3.02
24020CAK30/W33					5.5	3
24022CA/W33	110	170	60	2			362000	660000	1650	2050	5.11
24022CAK30/W33					5.5	3

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
24024CA/W33	120	180	60	2			374000	670000	1600	2000	5.4
24024CAK/W33					5.5	3
24026CA/W33	130	200	69	2			477000	815000	1500	1900	7.95
24026CAK/W33					5.5	3
24028CA/W33	140	210	69	2			495000	900000	1400	1800	8.45
24028CAK/W33					5.5	3
24030CA/W33	150	225	75	2.1			564000	1040000	1300	1700	10.5
24030CAK/W33					5.5	3
24032CA/W33	160	240	80	2.1			656000	120000	1100	1500	13.0
24032CAK/W33					8.3	4.5
24034CA/W33	170	260	90	2.1			799000	1460000	1000	1400	17.5
24034CAK/W33					8.3	4.5
24036CA/W33	180	280	100	2.1			973000	1730000	950	1300	23
24036CAK/W33					8.3	4.5
24038CA/W33	190	290	100	2.1			978000	1800000	950	1300	24.0
24038CAK/W33					8.3	4.5
24040CA/W33	200	310	109	2.1			1130000	2120000	900	1200	30.5
24040CAK/W33					11.1	6
24044CA/W33	220	340	118	3			1360000	2600000	850	1100	39.5
24044CAK/W33					11.1	6
24048CA/W33	240	360	118	3			1380000	2700000	800	1000	42.5
24048CAK/W33					11.1	6
24052CA/W33	260	400	140	4			1760000	3450000	700	900	64.5
24052CAK/W33					11.1	6

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
24056CA/W33	280	420	140	4			1870000	3800000	670	850	68.5
24056CAK30W33					11.1	6
24060CA/W33	300	460	160	4			2350000	4750000	600	750	97.0
24060CAK/W33					13.9	7.5
24064CA/W33	320	480	160	4			2480000	5100000	560	700	100.0
24064CAK/W33					13.9	7.5
24068CA	340	520	180	5			2990000	6200000	530	670	140.0
24072CA	360	540	180	5			3110000	6550000	500	630	145.0
24076CA	380	560	180	5			3160000	6800000	480	600	150.0
24080CA	400	600	200	5			3620000	7800000	450	560	205.0
24084CA	420	620	200	5			3740000	8150000	380	480	210.0
24088CA	440	650	212	6			4080000	8800000	360	450	245.0
24092CA	460	680	218	6			4370000	9500000	340	430	375.0
24096CA	480	700	218	6			4490000	10000000	340	430	285.0
240/500CA	500	720	218	6			4600000	10400000	320	400	295.0
24120CA/W33	100	165	65	2			360000	650000	1000	1400	5.7
24120CAK/W33					5.5	3
24122CA/W33	110	180	69	2			460000	750000	1000	1400	6.85
24122CAK/W33					5.5	3
24124CA/W33	120	200	80	2			575000	950000	900	1200	10.0
24124CAK30/W33					5.5	3
24126CA/W33	130	210	80	2			587000	1000000	900	1200	11
24126CAK30/W33					5.5	3
24128CA/W33	140	225	85	2.1			673000	1160000	850	1100	13.0
24128CAK30/W33					8.3	4.5

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Ball Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
24130CA/W33	150	250	100	2.1			897000	1530000	800	1000	19.5
24130CAK30/W33					8.3	4.5
24132CA/W33	160	270	109	2.1			1040000	1760000	700	900	25.0
24132CAK30/W33					8.3	4.5
24134CA/W33	170	280	109	2.1			1070000	1860000	670	850	26.5
24134CAK30/W33					8.3	4.5
24136CA/W33	180	300	118	3			1220000	2160000	630	800	33.5
24136CAK30/W33					11.1	6
24138CA/W33	190	320	128	3			1400000	2500000	600	750	42.0
24138CAK30/W33					11.1	6
24140CA/W33	200	340	140	3			1580000	2800000	560	700	52.0
24140CAK30/W33					11.1	6
24144CA/W33	220	370	150	4			1840000	3350000	500	630	65.0
24144CAK30/W33					11.1	6
24148CA/W33	240	400	160	4			2100000	3900000	480	600	80.5
24148CAK30/W33					11.1	6
24152CA/W33	260	440	180	4			2620000	4800000	430	530	110.0
24152CAK30/W33					13.9	7.5
24156CA/W33	280	460	180	5			2670000	5100000	400	500	120.0
24156CAK30/W33					13.9	7.5
24160CA/W33	300	500	200	5			3280000	6300000	360	450	155.0
24160CAK30/W33					13.9	7.5
24164CA/W33	320	540	218	5			3740000	7100000	340	430	210.0
24164CAK30/W33					16.7	9

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for further information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
24168CA	340	580	243	5			4660000	8650000	320	400	270
24172CA	360	600	243	5			4490000	8650000	300	380	270
24176CA	380	620	243	5			4600000	9150000	190	260	300.0
24180CA	400	650	250	6			4890000	9800000	180	240	340.0
24184CA	420	700	280	6			5750000	11400000	170	220	445.0
24188CA	440	720	280	6			5980000	12200000	170	220	460.0
24192CA	460	760	300	7.5			7250000	14600000	160	200	560
24196CA	480	790	308	7.5			7250000	15000000	150	190	605
241/500CA	500	830	325	7.5			8630000	17000000	140	180	745.0
23936CA/W33	180	250	52	2			431000	830000	1700	2200	8.20
23936CAK/W33					5.5	3
23938CA/W33	190	260	52	2			414000	800000	1700	2200	8.40
23938CAK/W33					5.5	3
23940CA/W33	200	280	60	2.1			546000	1040000	1600	2000	11.5
23940CAK/W33					8.3	4.5
23944CA/W33	220	300	60	2.1			546000	1080000	1500	1900	13.0
23944CAK/W33					8.3	4.5
23948CA/W33	240	320	60	2.1			564000	1160000	1300	1700	14.0
23948CAK/W33					8.3	4.5
23952CA/W33	260	360	75	2.1			880000	1800000	1100	1500	24.0
23952CAK/W33					8.3	4.5
23956CA/W33	280	380	75	2.1			845000	1760000	1000	1400	26.0
23956CAK/W33					11.1	6
23960CA/W33	300	420	90	3			1200000	2500000	950	1300	40.5
23960CAK/W33					11.1	6

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please refer to page 41 for futher information concerning split housing.

Spherical Roller Bearings

FIT Number	Boundary dimensions						Basic load ratings		Limiting speed for lubrication by (rev/min)		Mass
	mm						Dynamic C	Static Co
	d	D	B	r	b	k	N(1kg=9.8N)		Grease	Oil	kg
23964CA/W33	320	440	90	3			1240000	27010000	900	1200	42.0
23064CAK/W33					11.1	6
23968CA	340	460	90	3			1270000	2800000	900	1200	45.5
23972CA	360	480	90	3			1290000	2900000	850	1100	46.5
23976CA	380	520	106	4			1730000	3800000	800	1000	69
23980CA	400	540	106	4			1730000	3900000	750	950	71
23984CA	420	560	106	4			1760000	4150000	700	900	74.5
23988CA	440	600	118	4			2100000	4900000	670	850	99.5
23992CA	460	620	118	4			2190000	5000000	430	530	105
23996CA	480	650	128	5			2530000	5700000	400	500	125
239/550CA	500	670	128	5			2530000	6000000	400	500	130

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

CA=1 piece machined bronze retainer.

FIT Bearings also carries world class Split Pillow Block Housing that can go hand in hand with the K-Bore Spherical Roller Bearings. Split Pillow Block Housing are available but not limited to the following features: SAF, SDAF, SNG, SNU, Two Bolt, Four Bolt, Taconite Seals, Felt Seals, Ductile Material. Please contact us for out Split Pillow Block Catalog.

Mast Guide Bearings

Mast guide bearings are designed for heavy load carrying capabilities on Forklift applications.

FIT Number	Bore d - (in.)	Outside Diameter D-(in.)	Overall Width B-(in.)	Inner Ring Width T-(in.)	S - (in.)	Outer Radius r-(in.)
MG206-2RS-1*	1.1811	3.0000	1.1250	0.6299	0.2480	-
MG208-2RS-1*	1.3780	3.5920	1.2550	0.8268	0.2030	-
MG305-2RS-2	0.9843	3.0000	1.0000	0.6693	0.1650	0.3300
MG305-2RS-2	0.6693	2.9300	1.0000	0.6693	0.1650	0.3300
MG305-2RS-3*	0.9843	3.0060	1.0250	0.9843	-	0.3560
MG306-2RS-1	1.1811	3.5000	1.0000	0.7480	0.1300	0.3750
MG307-2RS-1	1.3780	3.9900	1.1250	0.8268	0.1790	0.3750
MG307-2RS-2	1.3780	3.7250	1.0000	0.8268	0.0300	0.3800
MG307-2RS-3	1.3780	4.0000	1.1875	0.8268	0.1790	0.3750
MG307-2RS-4	1.3780	3.9900	1.1250	0.8268	0.1790	0.2750
MG307-2RS-5	1.3780	3.9900	1.1250	0.8268	0.1790	0.3750
MG308-2RS-1*	1.5748	4.4860	1.2500	0.9055	0.1990	0.3750
MG309-2RS-1*	1.7717	5.0025	1.2500	0.9843	0.1330	0.3125
MG309-2RS-2*	1.7717	5.0480	1.2500	0.9843	0.1330
MG309-2RS-3	1.7717	5.0025	1.2500	1.0630	0.0310	0.4375
MG311-2RS-1	2.1654	6.0030	1.5000	1.1417	0.1770	0.4375

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

*Special desing BOLD - Preferred Desing

For additional specs., please consult a sales representative.

Mast Guide Bearings

FIT	BCA	MRC	HOOVER/NSK	MCGILL
MG206-2RS-1		206SZZ-16	X485
MG207-2RS-1	MG207FFA	207MZZ-A		BB1705
	MG207FFH	208SZZ-15		BB849
	MG207FFK	208SS-16
MG208-2RS-1	MG208FFA
MG209-2RS-1	MG209DD	209MZZ-1
MG305-2RS-1	MG305DD	305SZZ-3	X421
MG305-2RS-2	MG305DDA	305SZZ-6
MG305-2RS-3		305SZZ-7		BB1886
MG306-2RS-1	MG306DD	306SZZ-5	X55
MG307-2RS-1	MG307FF(H)	307SZZ-10	X376RS	BB2005-2
MG307-2RS-2	MG307FFK	307SZZ-9	X549RS	BB816
MG307-2RS-3	MG307FFA	307SZZ-4
MG307-2RS-5		307SZZ-14
MG308-2RS-1	MG308FFA	308SZZ-5		BB1747
MG307FFH	MG307FFH
MG309-2RS-1	MG309DDA	309SZZ-4	X501RS	BB1652
MG309-2RS-2		309SZZ-1	X469	BB850
MG309-2RS-3		309SZZ5
MG310-2RS-1		311SZZ-1		BB16493
MG311-2RS-1
MG312-2RS-1

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Please call for sizes not listed. FIT Bearings can always supply non-listed Items with sufficient lead-time (75-90 days)

Bearing Quality

All bearings meet or exceed AFBMA standards and ISO standards. The latest testing testing equipment is in use at each of our sources.

FIT continually inspects and surveys each plant's facilities, production equipment, and instrumentation to assure that they have the capabilities to meet the highest quality standards. Their commitment to quality is also reviewed.

Lubrication can be specified to meet your requirements whether oil, US grease, or any other grease. Steel used is bearing quality vacuum degassed 52100 or 440c stainless. Balls are grade 5 or better.

Bearing parts are cleaned with modern equipment; then assembled, lubricated and packaged in a controlled environment.

Radial Internal Clearance

 

Single Row Ball Bearing - No Load Method (0.0001")

Basic Bore Diameter MM		C2		Standard		C3		C4
		Acceptance Limits		Acceptance Limits		Acceptance Limits		Acceptance Limits
Over	Incl.	Low	High	Low	High	Low	High	Low	High
2.5	10	0	3	1	5	3	9	6	11
10	18	0	3.5	1	7	4	10	7	13
18	24	0	4	2	8	5	11	8	14
24	30	0.5	4.5	2	8	5	11	9	16
30	40	0.5	4.5	2	8	6	13	11	18
40	50	0.5	4.5	2.5	9	7	14	12	20
50	65	0.5	6	3.5	11	9	17	15	24
65	80	0.5	6	4	12	10	20	18	28
80	100	0.5	7	4.5	0.14	12	23	21	33
100	120	1	8	6	16	14	26	24	38
120	140	1	9	7	19	16	32	28	45
140	160	1	9	7	21	18	36	32	51
160	180	1	10	8	24	21	40	36	58
180	200	1	12	10	28	25	46	42	64

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Dimensional Tolerances

Single Row Ball Bearing - (0.0001")

Basic Bore Diameter MM		Bore Variation					Width Inner & Outer Rings					Width Variation (Parallelism)					Raceway Radial Runout
		ABEC					ABEC					ABEC					ABEC
Over	Incl.	1	3	5	7	9	1	3	5	7	9	1	3	5	7	9	1	3	5	7	9
0	10	-3	-3	-2	-1.5	-1	-50	-50	-15	-15	-15	6	6	2	1	0.5	4	2.5	1.5	1	0.5
10	18	-3	-3	-2	-1.5	-1	-50	-50	-30	-30	-30	8	8	2	1	0.5	4	3	1.5	1	0.5
18	30	-4	-3	-2.5	-2	-1	-50	-50	-50	-50	-50	8	8	2	1	0.5	5	3	1.5	1	1
30	50	-4.5	-4	-3	-2.5	-1	-50	-50	-50	-50	-50	8	8	2	1	0.5	6	4	2	1.5	1
50	80	-6	-4.5	-3.5	-3	-1.5	-60	-60	-60	-60	-60	10	10	2.5	1.5	0.5	8	4	2	1.5	1
80	120	-8	-6	-4	-3	-2	-80	-80	-80	-80	-80	10	10	3	1.5	1	10	5	2.5	2	1
120	150	-10	-7	-5	-4	-3	-100	-100	-100	-100	-100	12	12	3	2	1	12	7	3	2.5	1
150	180	-10	-7	-5	-4	-3	-100	-100	-120	-120	-120	12	12	3	2	1.5	12	7	3	2.5	1
180	250	-12	-8.5	-6	-4.5	-3	-120	-120	-140	-140	-140	12	12	4	2.5	2	16	8	4	3	2

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Dimensional Tolerances

Tapered Roller Bearing - (0.0001") All dimensions are in inches.

Cone		Class 4		Class 3		Class 0		Class 00
Bore
Inch		High	Low	High	Low	High	Low	High	Low
Over	Incl.	Cone Bore Variation
0	3	5	0	5	0	5	0	3	0
3	12	10	0	5	0	5	0	3	0
12	24	20	0	10	0	-	-	-	-
24	36	30	0	15	0	-	-	-	-
36	48	40	0	20	0	-	-	-	-

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Cone Bore		ClasscO.D.		Class 4		Class 3		Class 0		Class 00
Inch		Inch		High	Low	High	Low	High	Low	High	Low
Over	Incl.	Over	Incl.	Overall Bearing Width Variation
0	4	-	-	80	0	80	-80	80	-80	80	-80
4	12	-	-	140	-100	80	-80	80	-80	80	-80
12	24	-	20	150	-150	80	-80	-	-	-	-
12	24	20	-	150	-150	150	-150	-	-	-	-
24	-	-	-	150	-150	150	-150	-	-	-	-

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Cup		Class 4			Class 3			Class 0			Class 00
O.D.		Cup O.D. Variation		Max. Radial Runout	Cup O.D. Variation		Max. Radial Runout	Cup O.D. Variation		Max. Radial Runout	Cup O.D. Variation		Max. Radial Runou
Inch
Over	Incl.	High	Low		High	Low		High	Low		High	Low
0	12	10	0	20	5	0	3	5	0	1.5	3	0	0.75
12	24	20	0	20	10	0	7	-	-	-	-	-	-
24	36	30	0	30	15	0	7	-	-	-	-	-	-
36	48	40	0	30	20	0	30	-	-	-	-	-	-
48	-	50	0	30	30	0	30	-	-	-	-	-	-

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

Dimensional Control

Nominal Bore		Outside Variation					Width Variation (Parallelism)					Raceway Radial Runout
Diameter MM		ABEC					ABEC					ABEC
Over	Incl.	1	3	5	7	9	1	3	5	7	9	1	3	5	7	9
0	18	-3	-3	-2	-1.5	-1	6	6	2	1	0.5	6	4	2	1	0.5
18	30	-3.5	-3	-2.5	-2	-1.5	8	8	2	1	0.5	6	4	2.5	1.5	1
30	50	-4.5	-3	-3	-2.5	-1.5	8	8	2	1	0.5	8	4	3	2	1
50	80	-5	-4.5	-3.5	-3	-1.5	10	10	2.5	1	0.5	10	5	3	2	1.5
80	120	-6	-5	-4	-3	-2	10	10	3	1.5	1	14	7	4	2.5	2
120	150	-7	-6	-4.5	-3.5	-2	12	12	3	2	1	16	8	4.5	3	2
150	180	-10	-7	-5	-4	-3	12	12	3	2	1	18	9	5	3	2
180	250	-12	-8	-6	-4.5	-3	12	12	4	3	1.5	20	10	6	4	3
250	315	-14	-10	-7	-5	-3	14	14	4.5	3	2	24	12	7	4.5	3

If you have any questions, please feel free to contact us at sales@advancedbearings.com.

 

Back to Top

 

The ABEC tolerances are reviewed regularly and updated as required. The AFBMA Standards may be obtained by contacting: AFBMA, 1101 Connecticut Aven N.W., Suite 700, Washington, DC 20036. All dimensions are in inches.